Filter posts by category

Maintenance

Are Forklift Batteries Effect by the Heat - Sun Equipment

Lead-Acid or Lithium-Ion: Which Used Forklift Battery Handles Phoenix Heat Better?

Neither battery chemistry is heat-proof, and in Phoenix the way a battery was charged and stored tells you more about its remaining life than the label on the case. Lithium-ion packs run well at high operating temperatures, while lead-acid packs are forgiving but need charger settings that adjust for heat. Both lose life when they bake. If you are shopping for a used electric forklift in the Valley, the real question is which battery history you can verify. How hot is too hot for a forklift battery in Phoenix? Heat starts hurting a forklift battery well before it fails outright,

Lead-Acid or Lithium-Ion: Which Used Forklift Battery Handles Phoenix Heat Better? Read More »

Electric versus Propane Forklifts - Austin TX

Electric vs. Propane Forklifts: Which Makes Sense for Austin’s Manufacturing Boom?

For most Austin operations tied to the region’s semiconductor and advanced manufacturing growth, electric forklifts make more sense than propane, mainly because indoor cleanroom-adjacent facilities cannot tolerate combustion emissions and because electric units now represent the clear majority of new forklift purchases nationwide. That said, propane still has a real place in Austin’s industrial base, particularly for outdoor construction and yard work tied to the region’s ongoing building boom. The right answer depends less on which technology is “better” and more on where and how the forklift will actually work. Austin is not a typical Texas industrial market. Samsung’s semiconductor

Electric vs. Propane Forklifts: Which Makes Sense for Austin’s Manufacturing Boom? Read More »

Used Forklift Market in Dallas TX

Why Dallas-Fort Worth’s Industrial Boom Is Driving Record Demand for Used Forklifts in 2026

If you manage a warehouse, distribution center, or fabrication shop anywhere in the Metroplex, you have probably felt it already. Lead times on new equipment are stretching out. Good used units are getting scooped up faster than dealers can list them. And every time you drive past a construction site off I-20 or I-35W, there is another distribution building going up. That is not your imagination. The Dallas-Fort Worth industrial market just posted one of its strongest quarters in years, and it is reshaping how local businesses buy forklifts. The Numbers Behind the Rush In the first quarter of 2026,

Why Dallas-Fort Worth’s Industrial Boom Is Driving Record Demand for Used Forklifts in 2026 Read More »

Forklift Certification Guide by Sun Equipment - Phoenix AZ

Why Phoenix Warehouse Managers Are Overhauling Forklift Certification for 2026

Forklift certification in Phoenix used to be the kind of paperwork that sat in a drawer until somebody asked about it. That era is over. The Valley’s industrial boom has brought more warehouses, more operators, and more OSHA attention, and managers who treat operator training as a formality are the ones writing the biggest checks. Here is the reality on the ground. Phoenix has become one of the most active distribution markets in the Southwest, with fulfillment centers filling out the West Valley around Goodyear and Tolleson, semiconductor suppliers building along the Loop 303, and construction supply yards running flat

Why Phoenix Warehouse Managers Are Overhauling Forklift Certification for 2026 Read More »

Used Forklifts For Sale - Fort Worth TX - Sun Equipment

Used Forklifts Fort Worth TX: What Buyers Need to Know in 2026

Fort Worth is not a market where you can afford to wait on equipment. Dallas-Fort Worth started 2026 with more industrial space under construction than any metro in the country, and far north Fort Worth along the Alliance corridor carries the largest industrial construction pipeline of any submarket in the US. If you’re shopping for used forklifts in Fort Worth TX this year, here’s what actually matters: what’s driving demand, what these machines should cost, and how to avoid the units that will drain your maintenance budget. Why Fort Worth Forklift Demand Is Surging in 2026 The numbers are hard

Used Forklifts Fort Worth TX: What Buyers Need to Know in 2026 Read More »

What you need to know about forklifts in Austin TX

The Austin Advantage: Why 2026 is the Strategic Year for Used Forklift Acquisitions in Central Texas

Austin’s industrial economy is no longer a growth story — it’s an established reality. Warehouse and distribution expansion along I-35 and SH-130 has put real pressure on equipment supply chains, and businesses that move decisively on used forklifts in Austin TX this year will hold a meaningful cost advantage over competitors still waiting on new-unit lead times. If your operation needs lift capacity on the floor today, the secondary market is where that capacity lives. Here is what Central Texas buyers need to know before writing a check.   Why the Used Forklift Market Makes Sense for Austin Businesses in

The Austin Advantage: Why 2026 is the Strategic Year for Used Forklift Acquisitions in Central Texas Read More »

7 Steps for Inspecting a Forklift - Sun Equipment

How to Inspect a Used Forklift in 7 Steps: A Dallas Buyer’s Checklist

Buying a used forklift in Dallas is not the same as buying one in Cleveland or Portland. The DFW climate introduces wear patterns that simply do not exist in cooler, drier markets, and a buyer who does not know what to look for will inherit someone else’s maintenance backlog. Hydraulic seals crack faster here. Tires chunk on superheated asphalt. Battery compartments rust in ways that surprise buyers from out of state. Dallas is also a competitive market. With one of the fastest-growing commercial real estate footprints in the country, demand for used material handling equipment runs high across logistics corridors

How to Inspect a Used Forklift in 7 Steps: A Dallas Buyer’s Checklist Read More »

Sun Equipment Used Forklift Dealer in Texas

5 Signs It’s Time to Replace Your Aging Forklift Fleet — A Texas Fleet Manager’s Guide for 2026

By Sun Equipment | Serving Austin, Dallas, Fort Worth, Houston, and San Antonio If you manage a warehouse, distribution center, or job site in Texas, your equipment decisions in 2026 carry more weight than they have in years. Forklifts purchased during the 2020–2021 supply chain surge are now five or six years old — and for many Texas operations, they’re quietly becoming the most expensive machines on the floor. This isn’t a hypothetical. Texas runs one of the busiest logistics corridors in the United States. The triangle connecting Austin, Dallas–Fort Worth, Houston, and San Antonio moves an enormous share of

5 Signs It’s Time to Replace Your Aging Forklift Fleet — A Texas Fleet Manager’s Guide for 2026 Read More »

Manager Guide to Buying Used Forklifts in Texas

Buying Used Forklifts in Texas in 2026: What Fleet Managers Need to Know

A practical guide for operations in Houston, Dallas, Fort Worth, San Antonio, and Austin The Texas industrial market doesn’t take breaks. From the petrochemical corridors along the Houston Ship Channel to the massive distribution campuses anchoring the Dallas–Fort Worth Metroplex, demand for dependable material-handling equipment has intensified steadily — and the used forklift market is one of the clearest indicators of how that demand is being met. This isn’t a trend driven purely by budget constraints. In 2026, warehouse operators across Texas are choosing used equipment because new equipment simply isn’t available fast enough. Supply chain disruptions that began reshaping

Buying Used Forklifts in Texas in 2026: What Fleet Managers Need to Know Read More »

Everything I Have Learned Selling Used Forklifts

The Complete Buyer’s Guide to Inspecting Used Forklifts: What 30 Years in the Industry Has Taught Us

In my 30 years as President of Sun Equipment, I’ve walked thousands of customers through the process of selecting the right used forklift for their operation. I’ve seen businesses make smart purchases that served them well for decades, and unfortunately, I’ve also helped companies recover from costly mistakes when they bought equipment sight unseen from distant sellers. The used forklift market can be treacherous territory if you don’t know what to look for. But with the right approach—one I’ve refined through years of buying, reconditioning, and selling pre-owned equipment—you can find exceptional value while avoiding the pitfalls that catch inexperienced

The Complete Buyer’s Guide to Inspecting Used Forklifts: What 30 Years in the Industry Has Taught Us Read More »

Scroll to Top